Aircraft Tool Supply Plate Nut Drill Jig, 1/4" Single Wing Standard (Sws)

Aircraft Tool Supply Plate Nut Drill Jig, 1/4" Single Wing Standard (Sws) Reviews

Other Picture

Used to install standard 1/4" one lug single-wing style plate nuts (SWS).

Visit Store Now !!

Detail Products

Detail Reviews

Oct 15, 2011 22:55:03

Makita 6339DWDE 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit

Makita 6339DWDE 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit Reviews

Other Picture

Makita 6339DWDE 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit Feature

• Powerful 450 in.lbs. of torque.
• Two-piece D-31 motor with dual ball bearings for longer motor life.
• 16 torque settings plus drill mode.
• 3-speed gear selection (0-300, 0-600, 0-1,700rpm)
• New ergonomic design for comfort and less operator fatigue.

Tool size and volts don’t always tell you the whole story. Take this drill/driver, for example: It’s downright little, weighing in under 6 pounds, and it measures out at a tad over 9 inches. What a cute little drill, you say? Stand back – this cute little drill packs a monster 450 in./lbs. of ripping torque, more than a fair number of bigger, beefier drills we’ve had the pleasure of using.

What’s not to love, with all that power tucked into such a small, light, easy-on-your-body package? And there’s awesome speed, too, with a three-tier system that offers 0 to 300 rpm in low range, 0 to 600 in mid-range and a top spread of 0 to 1,700 rpm in third speed, to suit whatever material you’re drilling or driving into. Sometimes, you may encounter a little resistance if you’re switching from low gear to high; if that happens, running the tool in mid-gear for a couple seconds completely alleviates any snag.

We probably don’t have to tell you about Makita quality; their tools are made to last. The gear transmission here is all metal; the locking ratcheting chuck grabs bits like super glue; brushes are easily accessible for routine maintenance and reduced down time; the reversing switch has a center neutral position that functions as a lock-off for safety. They’ve even put a lot of thought into the design of the grip; it’s rubberized and feels great in hand. Even the balance is perfect.

Whether you’re in the construction trade, an avid do-it-yourselfer or just looking to buy your first drill, you absolutely won’t regret buying this one. -- Kris Jensen-Van Heste

What’s in the Box
Drill, two batteries, universal charger, Phillips/slotted bit, side handle, keyless chuck, battery cover, plastic tool case 2-pc. ND-31 motor with dual ball bearing for longer motor life. Max. Torque (in.-lbs.): 450, Speed - No Load (RPM): 0-300/0-600/0-1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: Yea, (2) 14.4V batteries, Charger Included: Yes, Case Included: Yes

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 09:04:04

Hilti 227949 SFH 151-A 2.0-Ah Drill/Driver

Hilti 227949 SFH 151-A 2.0-Ah Drill/Driver Reviews

Other Picture

Hilti 227949 SFH 151-A 2.0-Ah Drill/Driver Feature

• Hilti 227949 SFH 151-A 2.0-Ah Drill/Driver

used in very good cond.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 12, 2011 09:41:03

Sunex Tools (SUNSX545B) 3/8" Drive Reversible Right Angle Air Drill with Chuck

Sunex Tools (SUNSX545B) 3/8" Drive Reversible Right Angle Air Drill with Chuck Reviews

Other Picture

Sunex Tools (SUNSX545B) 3/8" Drive Reversible Right Angle Air Drill with Chuck Feature

• Sold Individually

• Reversible for added versatility
• 90 degree angle design for use in restricted areas
• Variable speed lever throttle
• Ribbed handle for positive grip
• Ball bearing construction for long life

Includes 3/8" Jacobs chuck and key. Free speed: 1,600 RPM - maximum capacity: 3/8" - Air Inlet: 1/4" NPT - Min. hose size: 3/8"
recommended air pressure: 90 PSI - average air consumption: 4 cfm - sound level: 94 dBA - length: 8" - shipping weight: 2.75 lbs.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 11, 2011 04:57:09

Heavy Duty 1240w Electric Demolition Jack Hammer

Heavy Duty 1240w Electric Demolition Jack Hammer Reviews

Other Picture

Heavy Duty 1240w Electric Demolition Jack Hammer Feature

• Voltage: 110v/60Hz
• Power: 1240 Watts
• No Load Speed: 1400RPM
• Housing: Metal with Rust Resistant Coating

Item includes: -16" Bull Point Chisel. -16" Cold Chisel. -Oil Feeder with Oil. -Hexagon Bar Wrenches. -Wrench. -Heavy Duty Metal Case.

Visit Store Now !!

Detail Products

• Clay Spade Scoop Shovel Bit for Industrial Grade Demolition Jack Hammer
• Hitachi 985233 1-1/8-Inch Hex 5-1/2-Inch by 20-Inch Hammer Clay Spade
• Hitachi 985232 1-1/8-Inch Hex 3-Inch x 20-Inch Scaling Hammer Chisel
• Bosch HCK001 7-Piece SDS Plus Rotary Hammer Drill Bit Set
• New Demolition Electric Jack Hammer W/ Bits & Heavy Duty Metal Case

Detail Reviews

Sep 09, 2011 08:40:05

Craftsman Professional 26302 20-volt Lithium-ion Cordless Drill/driver with LED Work Light - Tool Only

Craftsman Professional 26302 20-volt Lithium-ion Cordless Drill/driver with LED Work Light - Tool Only Reviews

Other Picture

Craftsman Professional 26302 20-volt Lithium-ion Cordless Drill/driver with LED Work Light - Tool Only Feature

• delivers up to 500"/lbs. of torque
• Cordless Drill/Driver 20 Volt, 0-350, 0-1300 RPM
• Cordless Ergonomic T handle with soft grip 24-position clutch
• 1/2" Single sleeve ratcheting Keyless chuck
• Extended length variable speed trigger Built-in LED work light.

Attention Reconditioned Purchaser: This Reconditioned Product does not come with the Owners/ Instruction Manual. Manuals are available as a downloadable copy The Reconditioned product may not include any original Accessories that are listed on the original Manual. * Items pictured are representative only

Visit Store Now !!

Detail Products

Detail Reviews

Sep 08, 2011 06:26:04

Ivy Classic 1-1/4 x 22.5" Spline 4 Cutter Hammer Drill

Ivy Classic 1-1/4 x 22.5" Spline 4 Cutter Hammer Drill Reviews

Other Picture

Ivy Classic 1-1/4 x 22.5" Spline 4 Cutter Hammer Drill

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 01:46:04

Factory-Reconditioned Milwaukee 0370-80 3/8-Inch Close Quarter Angle Drill

Factory-Reconditioned Milwaukee 0370-80 3/8-Inch Close Quarter Angle Drill Reviews

Other Picture

Factory-Reconditioned Milwaukee 0370-80 3/8-Inch Close Quarter Angle Drill Feature

• Reconditioned Milwaukee Products have a One-year warranty through the Milwaukee factory or an authorized service center
• Provides a Unique Chuck Angle for Reaching Close Quarters
• Large Paddle Trigger and Textured Grip area provides Comfort and Control in all Positions
• Drill's Angled Cord Exit keeps the Cord out of the Work Area
• Convenient Forward/Reverse Lever makes the Milwaukee 0370-80 Incredibly easy to use in Close Quarters

The Milwaukee 0370-80 is a Factory Reconditioned 3/8-Inch Close Quarter Angle Drill. The 0370-20 Close Quarter Angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.   Features: Metal framed gear train for longer gear life Large paddle trigger for smooth control and easy grip-inch any position Angled chuck for reaching close quarters other drills cannot reach Textured palm grip reduces slipping Reverse lever for one hand operation What's In the Box: Milwaukee 0370-80 Factory Reconditioned 3/8-Inch Close Quarter Angle Drill

Visit Store Now !!

Detail Products

Detail Reviews

Sep 04, 2011 15:39:03

Speedaire 2YPR2 Pneumatic Drill, Keyed, 3/8 In, 1800 RPM

Speedaire 2YPR2 Pneumatic Drill, Keyed, 3/8 In, 1800 RPM Reviews

Other Picture

Pneumatic Drill, General Duty, Drill Chuck Type Keyed, Chuck Size 3/8 In, HP 1/3, Free Speed 1800 RPM, Average CFM @15 Second Run Time 2.0, CFM @Full Load 8, Required Pressure 90 PSI, Reversing, Bearing Ball/Roller Bearing, Composite Handle Material, Variable Speed, Throttle Type' Trigger, Air Inlet NPT (In) 1/4, Min Hose (In) 3/8, Variable Speed Trigger Switch, Housing Composite, Planetary Gear Train, Tool Length 8 In, Tool Weight 2.1 Lb, Includes Chuck Key

Visit Store Now !!

Detail Products

Detail Reviews

Sep 03, 2011 05:59:03

1/2" Dr. Reversible Air Drill With Chuck (SX221B)

1/2" Dr. Reversible Air Drill With Chuck (SX221B) Reviews

Other Picture

Sunex Tools 1/2" Dr. Reversible Air Drill With Chuck Planetary gearing for heavy duty use

Positive action trigger for speed control

Also available individually: 1/2" Jacobs(R) chuck with key -part # RS87109

Heavy duty gearing for high performance jobs

Muffled handle exhaust for extra quiet operation

Heavy duty side handle for added control

Reversible for added versatility

1/2" Jacobs(R) keyless chuck included

Also available individually: 1/2" Jacobs(R) keyless chuck -part # RS79437N

Specifications:

Free Speed (RPM) @ 90PSI 500

Maximum Capacity (In.) 1/2

Air Inlet (NPT) 1/4

Min. Hose Size (I.D.) 3/8

Recommended Air Pressure (PSI) 90

Average Air Consumption (CFM) 4

Sound Level (dBA) 89

Length (In.) 9.25

Usually ships in 2 - 3 days

Visit Store Now !!

Detail Products

Detail Reviews

Sep 02, 2011 07:21:04

Milwaukee 0302-80 1/2" Magnum Drill - Quik-Lock Cord

Milwaukee 0302-80 1/2" Magnum Drill - Quik-Lock Cord Reviews

Other Picture

Milwaukee 0302-80 1/2" Magnum Drill - Quik-Lock Cord Feature

• Powerful 8.0 Amp motor, 0 to 850 RPM, variable speed control
• Grip strength - exclusive, all metal ratcheting chuck with carbide jaws has the highest grip torque on bits
• All metal gear case and diaphragm
• 8 ft. 3 wire Quik-Lok rubber cord for easy storage and field replacement
• 360 degree locking side handle with an ergonomic tactile grip and two finger trigger for user comfort and balance

The Milwaukee 0302-80 factory reconditioned 1/2" drill has powerful 8.0 Amp motor for industrial and construction applications. The value added convenience of the exclusive all-metal ratcheting keyless chuck with carbide jaws and the Quik-Lok cord for instant replacement and easy storage are unmatched in the industry. This drill is at such an outstanding price because it is factory reconditioned. An authorized Milwaukee service center has reconditioned it back to new and is offering a 1 year warranty to prove their craftsmanship.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 01, 2011 06:54:04

Milwaukee 4005 Diamond Coring Motor 600/1200 RPM, 20 Amp with Clutch

Milwaukee 4005 Diamond Coring Motor 600/1200 RPM, 20 Amp with Clutch Reviews

Other Picture

Milwaukee 4005 Diamond Coring Motor 600/1200 RPM, 20 Amp with Clutch Feature

• Two speeds: 600 and 1200 rpm, 20 amp motor, Clutch protection protects gears and motor, Built-in water swivel
• Built-In Water Swivel, Water Hose Adapter, Water Control Valve, Open End Wrench
• Clutch protection protects gears and motor
• Built-in water swivel
• Limited warranty, 30-day no-risk trial

Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 Amp model features 4.8 peak horsepower with a 600 RPM or 1200 RPM operating speed. U.S.A. Speed - No Load (RPM): 600 / 1,200, Volts: 120, Max. HP: 4.8, Amps: 20, Motor Protection: Clutch, Spindle Size (in.): 1 1/4 - 7, Suggested Diameter in Medium Aggreate (in.): 4 -7 (600) / 3/4 - 4 (1,200), Tool Weight (lbs.): 24

Visit Store Now !!

Detail Products

Detail Reviews

Aug 30, 2011 22:28:17

ITW Brands 79011 Tapcon Condrive 500 Installation Tool

ITW Brands 79011 Tapcon Condrive 500 Installation Tool Reviews

Other Picture

ITW Brands 79011 Tapcon Condrive 500 Installation Tool Feature

• Itw Brands #79011 Mason Anchoring System
• ITW BRANDS

Simplifies the process of changing from drill to drive. Designed for use with a hammer drill and Tapcon drill bits. Installs all sizes of hex and phillips head fasteners.

Visit Store Now !!

Detail Products

• DEWALT DC9096-2 18-Volt XRP 2.4 Amp Hour NiCad Pod-Style Battery, 2 Pack

Detail Reviews

Aug 30, 2011 01:00:05

Speedaire 2YPR5 Pneumatic Drill, Keless, 1/2 In, 800 RPM

Speedaire 2YPR5 Pneumatic Drill, Keless, 1/2 In, 800 RPM Reviews

Other Picture

Pneumatic Drill, General Duty, Drill Chuck Type Keyless, Chuck Size 1/2 In, HP 1/2, Free Speed 800 RPM, Average CFM @15 Second Run Time 5.8, CFM @Full Load 23, Required Pressure 90 PSI, Bearing Ball/Roller Bearing, Composite Handle Material, Variable Speed, Throttle Type' Trigger, Air Inlet NPT (In) 1/4, Min Hose (In) 3/8, Variable Speed Trigger Switch, Housing Aluminum, Planetary Gear Train, Tool Length 8 1/2 In, Tool Weight 2.8 Lb, Includes Auxiliary Handle And Chuck Key

Visit Store Now !!

Detail Products

Detail Reviews

Aug 29, 2011 05:29:03

Makita 8444DWDE 1/2-Inch 18-Volt NiMH Cordless Hammer Drill/Driver Kit

Makita 8444DWDE 1/2-Inch 18-Volt NiMH Cordless Hammer Drill/Driver Kit Reviews

Other Picture

Makita 8444DWDE 1/2-Inch 18-Volt NiMH Cordless Hammer Drill/Driver Kit Feature

• Built to handle even the toughest conditions
• Delivers 560-inch pounds of torque; out-performs other 18-volt models
• 3-speed all-metal gear transmission; 2-piece motor
• Includes 2 batteries, charger, keyless chuck, side handle and case
• 1-year limited warranty

The Makita 1/2-Inch 18-Volt NiMH Cordless Hammer Drill/Driver Kit is built to handle even the toughest conditions. This powerful tool delivers 560-inch pounds of torque, out-performing other 18-volt models. It gives the option of 16 separate torque settings for precision driving, a three-speed all-metal gear transmission (0-300, 0-600, and 0-1,700 RPM), and three-mode settings: hammer drilling, driving and drilling. The two-piece motor with dual ball bearings provides for a longer motor life. An ergonomic rubberized grip offers comfort and control. This Makita tool comes with a 1-year limited warranty.

What's in the Box
Makita 1/2-Inch 18-Volt NiMH Cordless Hammer Drill/Driver, two batteries, charger, keyless chuck, side handle and case. 2-pc. ND-31 motor with dual ball bearing for longer motor life. Cordless: Yes, Volts: 18, Rated RPM: 0 - 1,700, Variable Speed: Yes, Torque (in./lbs.): 560, Solid Bit Capacity (in.): 5/8, Hammering Modes: Hammering Only, Hammering with Rotation, Blows Per Minute (BMP): 0 - 22,500, Battery Included: (2) 18V Ni-MH, Charger Included: Yes, Case Included: Yes

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 03:41:04

Ivy Classic 1/2 x 12" SDS Plus® Hammer Drill

Ivy Classic 1/2 x 12" SDS Plus® Hammer Drill Reviews

Other Picture

Ivy Classic 1/2 x 12" SDS Plus® Hammer Drill

Visit Store Now !!

Detail Products

Detail Reviews

Aug 26, 2011 07:53:04

Metabo BSP15.6 Plus 15.6-Volt Cordless Drill/Driver Kit

Metabo BSP15.6 Plus 15.6-Volt Cordless Drill/Driver Kit Reviews

Other Picture

Metabo BSP15.6 Plus 15.6-Volt Cordless Drill/Driver Kit Feature

• Maximum torque, soft 177 in-lbs Pulse torque 195 in-lbs Maximum torque, hard 487 in-lbs
• Drilling capacity in - Steel 1/2 "/5/16 " - Wood 1"9/16 "
• 20-level adjustable torque, plus drilling level
• Quick-action keyless chuck and spindle stop gear for convenient one-hand tool change: Metabo "Quick"
• 3-level planetary metal gears

Includes BSP15.6 Plus 15.6 Volt Cordless NiCD Drill/Driver - 602420520, (2) 15.6 Volt Cordless NiCD 2.4 Ah Batteries (BST/BSP) - 631749000, 4.8 Volt - 18 Volt Charger (C45) - 627072000, Keyless Chuck - 636517000, Side Handle - 314000540, Carrying Case - 625440000

Visit Store Now !!

Detail Products

Detail Reviews

Aug 23, 2011 23:26:06